Instructive Guide to Troubleshoot Netgear Orbi Purple Light Issue

Instructive Guide to Troubleshoot Netgear Orbi Purple Light Issue

The status of the LED on your Netgear Orbi tells how well it is performing. For example:

  • RED light: improper power supply
  • WHITE light: WiFi connectivity issues
  • BLUE light: impartial router setup

However, if the LED on your Orbi router is flashing purple, then it isn’t because of just one reason. Several factors have contributed to this issue. Whatever the reason might be, going through the following Orbi troubleshooting hacks will definitely help you rectify the Netgear Orbi purple light issue. Thus, get to reading.

Rectified: Netgear Orbi Purple Light Issue

  1. Give Your Netgear Orbi a Re-start

It is no shocker that technical glitches are one of the leading reasons behind the Netgear Orbi purple light issue. But, the good news is that these glitches can be taken care of doing the simple act of rebooting your Netgear Orbi router.

In order to give your wireless device a new start, all that is required is, powering off your Netgear Orbi router, waiting for a couple of seconds, and then, doing the complete opposite of the first step.

  1. Check the Ethernet Connection

Many users don’t pay attention to the condition of the Ethernet cable while connecting their Netgear Orbi routers to their existing modems. Chances are that you stepped into the same boat. Check once. If what we are saying is true, then consider replacing the cable with a new one.

Apart from that, ensure that the Ethernet connection between your devices is finger-tight. This will prevent you from experiencing technical issues in the distant future.

  1. Reduce the Distance Between Devices

Yes, it is always recommended to not place your Netgear Orbi router and the existing modem way too close. However, that does not mean you need to keep them poles apart. That isn’t good either.

Therefore, rectify your mistake by reducing the distance between your router and modem. Ensure that both your devices are placed at approximately fifty feet.

  1. Perform Orbi Firmware Update

An outdated or corrupted firmware can also be a huge contributing factor to why your Orbi is flashing purple. To eliminate this factor, consider updating the Netgear  Orbi firmware   

Here is how you can update your Orbi device:

  • Gain access to your computer.
  • Right after that, open up a web browser.

Note: The internet browser you are using ought to be running on its most recent version.

  • In the address field of your browser, enter
  • Press the Enter key.
  • Once you are on the Netgear Orbi login page, enter the default admin details.
  • Click the Log In button.
  • Hit Maintenance.

Note: If you are using a older model of Netgear Orbi router, then you need to access the Administration option instead of the Maintenance option.

  • Click Firmware Update.

Following the on-screen prompts will help you complete the Orbi firmware update process.

  1. Reset Your Netgear Orbi Router

If you are still not able to troubleshoot the Netgear Orbi purple light issue, then waste no more in performing factory default reset.

Resetting your Orbi device is not rocket science, but a lot of users face issues while walking through the process. If you fear that you might land amongst them, follow the below-given steps. They will surely help you reset your device in a hassle-free way:

  • Locate the Reset button at the back of your Netgear Orbi router.
  • Press the button as soon as you locate it.
  • Wait for as long as you can.

And you are done! Once the Netgear Orbi reset process has ended, it’s time to reconfigure your wireless device via  or the Netgear Orbi application.

Need help in setting up your router? Well, in that case, referring to the step-by-step guidelines given in the user manual will be useful to you.

Wrap Up

We are ending this guide in the hope that the troubleshooting hacks mentioned above will help you resolve the Netgear Orbi purple light issue in the most hassle-free way ever.

If you are aware of any other hack through which the same issue can be taken care of, do share it with your fellow readers. Thinking about how you can do that? Well, it’s a two-way thing. You need to write down the hack in the comment section and press the Enter key. See? It’s that simple.