In a time where Covid-19 has hit rock bottom, it’s become quite important to stay indoors. But the problem is that staying indoors won’t fill our bellies. Perhaps that is why many people nowadays have started working from home in order to fulfill their day-to-day requirements. However, with so many people working online, the need for a blazing-fast internet connection has increased. So, what to do in this case? Well, I have the perfect solution to take care of your problem – Netgear AC750 setup.
By setting up a Netgear AC750 WiFi extender in your home, you’ll be able to work online without being driven down due to internet-related issues.
You don’t trust me? No problem! At the end of this article, you surely will. So, without any further ado, let’s get started, shall we?
Table of Contents
Step-by-Step Guide to Perform Netgear AC750 Setup
There are various ways to install an extender but the Manual Method is the most-used setup method by users all across the globe. If literally ‘every’ user is using this method, then there’s got to be something special about it, right?
To know how to set up your AC750 extender, walk through the instructions mentioned below:
1. Where to Place the Extender?
Before you get on with the setup process, you need to first place your extender at the right location. The reason being, a correct location will decide whether your WiFi device is being useful or not.
Place your Netgear AC750 extender in the center-most location of your house. That way, you’ll receive WiFi signals in every damn corner of your house, even the dead zones. Also, make sure that the WiFi router is positioned in the same room as that of the extender.
2. Proceed to Hardware Configuration
The next step in line is to get the hardware in place. To do that, ensure that your Netgear extender is plugged into a wall socket and powered on. Once you’ve turned your device on, check if the LED light is becoming solid green or not. If not, then restart your device.
Caution: Do not proceed further with the setup process until the power LED becomes green.
3. Launch an Internet Browser
After you’re done with the hardware configuration, it’s time to connect to the network of your extender. For that, switch on your laptop or computer (anything that you prefer) and connect to Netgear_Ext.
Then, launch a web browser and enter mywifiext in its address bar. Once the Netgear AC750 extender login page appears, fill in the default login credentials. Don’t forget to click on the Log In button.
Note: If you’re using an iOS mobile device to install the extender, then it is recommended that you make use of mywifiext.local.
4. Finish Setting Up Your WiFi Device
As soon as you hit the Log In option, the Netgear AC750 Setup Wizard will appear on your screen. Follow the on-screen instructions to connect your extender to the existing WiFi network. Done? Good. Now, change the location of your AC750 extender.
And with that, you’re done!
Conclusion
So, this was all about how to perform Netgear AC750 setup. Are you now convinced that setting up an extender will attend to all your internet-related needs? If the answer is yes, then feel free to connect as many devices as you want with the extender and enjoy working from home.