There are many benefits to installing street lights in your city. However, there are some considerations that you should take before you go ahead and install them. These considerations include cost, safety, and specifications. Let’s look at each one. Read on to learn more about the benefits of installing street lighting. Also, keep in mind that you should consider the location of your new lights when choosing the lighting for your area. This way, your neighbors will know if you’re putting up new lights.
Installing street lights is an important aspect of city planning and development. The city must meet certain guidelines to ensure that the lighting meets the required safety standards. The NYC DOT Division of Street Lighting Engineering (DSLE) processes documentation for permits for permanent or temporary changes to street lights. If the changes involve moving, installing, or changing existing signals, the DSLE must approve the plans. To obtain the proper permits, it is imperative to submit detailed plans and include indemnification of the City and the electrical contractor.
Xcel energy, which owns the electricity for street lighting in the city, provides a 25-year warranty on the lights. At the end of this period, the City will evaluate the lighting and repair needs of “enhanced” areas. If the lighting does not meet these requirements, a reconstruction project will be considered. Developers may also elect to install street lights as part of their overall development plan. For that, they must submit a street lighting plan for review and approval.
How much does it cost to install street lighting? This is a complicated process that requires several people. Depending on your city and location, you will need to hire two or more companies to complete the project. The cost of streetlights will also depend on the size of the light pole and how well it is designed to reflect light. Choosing the right lighting is essential to ensure safety for both pedestrians and drivers on the street. Listed below are some of the factors that will affect the price.
Traditional street lights are expensive because they draw power from the main electricity grid. The monthly electricity bill for a single street light can be as high as $1500 over a ten-year period. But if you plan on installing hundreds of light fixtures, the bill can be significantly higher. In this case, you may want to consider using solar street lights. This type of lighting is cost-effective and will save you money on electricity bills.
There are several important specifications to consider when installing street lighting. First, the streetlights should be in alignment with the traffic signal. For new installations, square bronze light poles shall be used. Where round galvanized poles are already in place, they may be replaced with the square bronze poles. The lighting levels and placements of street lights should also be considered. Listed below are some of the most common installation requirements.
Conduit: The conduit between the service pedestal and street lights shall be 2 inches in diameter. A spare 2-inch conduit shall be provided for future use. Conduits between street lights must run handhole-to-handhole. During construction, conduits must be installed at least two feet below the finished grade. If the lighting system is to be connected to other utilities, the conduits may be deeper. A few other details to keep in mind:
Many factors come into play when selecting the right type of street lighting. Increasing the illuminance of the street is a key element, but it should be noted that uniformity of illumination is equally as important. The main reason behind this shift is energy efficiency: LEDs are far more energy-efficient than traditional orange sodium lamps, saving taxpayers money while allowing councils more flexibility to design and manage their lighting schemes. Here are some tips to consider when choosing the right type of street lighting for your area.
Street lighting at intersections can help reduce nighttime crashes by making features of the road more visible. Additionally, it can aid drivers in navigating a street, and can even help them spot other road users and large animals in the street. Midblock street lighting is ideal for intersections that have high traffic volumes at night. Roundabouts should also be fitted with at least one luminaire. For example, in areas with low street lighting, a single luminaire is not enough.
Requirements for installing street lighting require that all new streetlights utilize Light Emitting Diode (LED) luminaires with a correlated color temperature of 3,000 degrees Kelvin. New streetlight poles must be bronze in color, or gray if the streetlights are installed on a galvanized light pole. LED luminaires must be on the City’s Approved Products List. They must meet all City specifications and be approved equal to existing streetlights.
The Bremerton Street Lighting Standards set the minimum illumination levels and uniformity for various classifications of roadways. Street lighting systems must meet the desired illumination, as well as standards for energy efficiency. In addition, all materials used must be UL-listed by the Illuminating Engineering Society. The following examples illustrate the requirements for street lighting. This guide is a good resource for planning a street lighting system. It will help you choose the proper system for your needs.