3 Tips To Setup Your Wavlink WiFi Extender

3 Tips To Setup Your Wavlink WiFi Extender

Are you searching for the information on Wavlink extender setup?. In this post, you will get the tips about Wavlink WiFi extender setup. It is very easy to set up your Wavlink WiFi extender by using these methods.

Setup Your Wavlink Extender Via Manually Method

Here are some quick tips, which you can use very simply:

  • Firstly, connect your Wavlink WiFi extender to the host router.
  • As soon as the extender glows solid LED light.
  • Now, hold a laptop, tablet, or other WiFi device, which is enabled.
  • After that, select the WiFi option under settings on your WiFi device.
  • Next, a network with the name Wavlink extender setup_Ext will show.
  • Open any web browser after linking to the “EXT” network, and then enter the ap.setup into the address bar.
  • Follow the AP extender setup instructions to install the extender, after you see a new extender setup page on the screen.

Setup Your Wavlink Extender By WPS Method

One of the simplest ways to link the extender to a current WiFi network is to configure it using the WPS button.

To install the extender, you need to follow these steps:

  • Firstly, put your extender close to the router.
  • Now, switch on your wifi range extender and wait for a few minutes till the light of the power LED turns to solid green.
  • After that, press the WPS button of your WiFi extender.
  • Thereafter, press the WPS button of the main router.
  •  After this process, you will see a green light which is blinking on your router and also on the extender.
  • Allow the extender and home wifi system to sync for 1-2 minutes.
  • Successful completion of the Wavlink extender setup process.
  • Lastly, to finish the installation procedure, sign in to Ap.setup.

Setup Wavlink WiFi extender in Access Point Mode

  • By turning on your Wavlink WiFi extender, you can begin the Wavlink WiFi setup process. To do this, plug it into a wall outlet and activate it by pressing the power button.
  • Find the mode selector button and change it to the AP setting at this time.
  • It is a time to take an ethernet cable, join one end of the ethernet cable into the main router port or another end into the wavlink extender port.
  • Once you connect all of your WiFi devices, then turn on your computer and launch your preferred web browser.
  • Enter wifi.Wavlink.comsetup in the address field of the browser by moving there.
  • The AP.setup Wavlink login page will appear after pressing the enter key.
  • You must select login and enter the default Wavlink setup credentials here.

Still if you can’t go to the login page, then check these:

Reset Your Device

When the device turns on, then immediately press the reset button on the back panel with a solid pin for about 8 seconds. The device has been successfully reset. If you can see all the lights flashing, then turning off and coming back on gradually in some places.

Check The Firmware Version 

After setup, if the extender’s connection is unstable, check your device’s firmware. The firmware must occasionally update. The steps below are beneficial for your process:

  • You should start by visiting the Wavlink WiFi extender’s official website.
  • Download and install the most recent Wavlink extender software version at this time.
  • Keep the firmware file you downloaded on your laptop or computer.
  • Now, go to the web interface for your WiFi gadget.
  • The update firmware folder may upload by clicking on it.
  • Let’s make new changes to your router.
  • Both the router and the modem may reboot to check for updates.
  • Both the router and the modem may reboot to check for updates.
  • After completing all the steps, your Wavlink WiFi extender’s firmware will successfully update.

To Conclude

In this article, we give you the information on setup methods of Wavlink WiFi extender. Also you get the knowledge about resetting your device and upgrading the firmware version of your extender. In other cases, if you are facing any kind of problem, then you can tell us in the comment box.