Netgear extender red light error is one of the most reported issues nowadays. Due to this error, users can’t make the most of their Netgear range extender. If the same issue has become a real headache for you, here’s the remedy. This post will shed some light on the reasons causing the Netgear extender blinking red as well as the permanent solution to this issue. Let’s get the ball rolling.
Why am I Seeing Red Light on My Netgear Extender?
Here are the top-most reasons why your Netgear extender is showing red light:
- The extender is placed near the devices that emit radioactive waves. Microwaves, refrigerators, baby monitors, cordless phones, Bluetooth speakers, and electronic toys are some of such devices.
- You kept the Netgear range extender in a dead zone.
- Netgear extender failed to update its firmware.
- There is no Mac address allocated to your Netgear extender.
- Congested WiFi channels.
- The home WiFi router is not connecting to the internet.
Basic Troubleshooting Tips to Fix Netgear Extender Red Light
Let’s have a quick glance at the basic troubleshooting tips to get rid of the red blinking LED on your Netgear range extender:
- Bring your Netgear WiFi extender to the same room where your home router is already placed.
- Check all cables connected to your Netgear extender. They should be in a good shape, which means no damage should be there. In the event that you find any cable damaged, get it replaced immediately.
- Check your WiFi router and make sure that none of its hardware parts are damaged.
- Access mywifiext web page and confirm if both WiFi bands, i.e. 2.4 GHz and 5 GHz are enabled.
- Be sure that your Netgear wireless range extender is getting constant power supply from the wall socket.
- Update your Netgear WiFi range extender’s firmware on a regular basis.
- Don’t forget to check the power outlet to which your Netgear extender is connected. It must be free from any short circuits.
- During the Netgear extender setup, the internet connection should be fast.
- Keep your Netgear extender away from mirrors, glasses, microwaves, refrigerators, fish tanks, baby monitors, and related devices.
- Reboot your WiFi range extender. For those who are unaware of the term, rebooting means turning off the extender for some time and then turning it on again.
- Add the Mac address of your extender to the Access Control List.
- Make sure that your Netgear extender is properly configured.
Advanced Troubleshooting Tips
None of the aforementioned basic troubleshooting tips fixed the issue for you? Fret not! Go for the advanced troubleshooting steps given underneath:
- Verify if your Netgear extender is properly connected to the router using an Ethernet cable.
- Access www.mywifiext.net web page and turn off the 5 GHz WiFi band.
- Also, enabling the FastLane technology for your Netgear extender may also help you fix the red light issue.
- Turn on the One WiFi Name feature for your Netgear extender.
- Retrieve all the factory default settings on your extender. For this, just press and hold the Reset button on the extender with a paper clip or pin-like device. After that, wait until your Netgear wireless extender reboots properly.
- Disconnect your Netgear extender from the router and reconnect it after some time.
- If there are multiple devices connected to your Netgear extender’s network, disconnect the unnecessary ones.
- Check all hardware parts of your Netgear extender. None of them should be damaged.
The Final Thoughts
So, these were our basic and advanced troubleshooting tips to get rid of the Netgear extender red light error. Which troubleshooting tactic has fixed the issue for you? Let us know in the comments section below.